Sorption dehumidifier DR-040-16A
[/fusion_builder_column_inner]
[/fusion_text]
- Stainless steel housing
- SSCR sorption rotor
- Common fan for process and regeneration air
- With electric PTC heater with overheating protection
- With internal heat recovery
Specifications/ instructions:
Download Specifications_DR-40-50_DE.pdf (207.54 KB)
Download Dimensions_DR-40-50R.pdf (51.37 KB)
[fusion_button link=”https://www.kirsch-tec.at/kontakt/anfrage/” color=”default” size=”” type=”” shape=”” target=”_self” title=”” gradient_colors=”
” gradient_hover_colors=”
” accent_color=”” accent_hover_color=”” bevel_color=”” border_width=”1px” shadow=”” icon=”fa-check-circle-o” icon_position=”left” icon_divider=”no” modal=”” animation_type=”0″ animation_direction=”left” animation_speed=”1″ alignment=”right” class=”” id=””]Send a request[/fusion_button]
| Dehumidification capacity at 20° C and 60% rel. humidity: | 2,3 kg/h |
| Dehumidification capacity at 30°C and 80 % rel. humidity: | 2,94 kg/h |
| Dehumidification capacity at 10°C and 70 % rel. humidity: | 1,61 kg/h |
| Dehumidification capacity at 0°C and 90 % rel. humidity: | 1,17 kg/h |
| Process airflow, nominal, at ext. pressure: |
550 m³/h, pri 150 Pa ext.
|
| Regeneration airflow, nominal, at ext. pressure: | 150 m³/h, bei 150 Pa ext. |
| Working temperature: | -20 to +35 °C |
| Working range humidity: | 10 – 100 % rF |
| El. heating capacity, max.: | 3 kW |
| Electrical motor power, max.: | 0,3 kW |
| Total power, max.: | 3,3 kW |
| Connection voltage: | 1x 230V, 50 Hz |
| Fuse: | 16 A |
| Required switching for remote contact (e.g., hygrostat or remote ON): | 1 A (control voltage) |
| Height (total): | 599 mm |
| Width (total): | 670 mm |
| Depth (total): | 575 mm |
| Weight: | 50 kg |
| Inlet process air: | 160 mm |
| Outlet process air (dry air): | 160 mm |
| Inlet regeneration air: | 100 mm |
| Outlet regeneration air (wet air): | 100 mm |
| Rotor speed: | 28 1/h |
| Noise level, with connected ducting, 1m free-field: | < 60 dB(A) |
| Filter class: | G3 |
| Application range: |
Diverse application range, to achieve the lowest possible relative humidity, to dry air to specific value, or at low temperatures, with wet air exhaust to the outside
|
| Working principle: | RECUSORB |
| Installation: |
Stationary, standing
|
| Wet air exhaust: | Required |
| Housing: | Stainless steel, self standing |
| Maintenance accessibility: | From the front and from above |
| Air filter, class: | A common G3 filter for the process and regeneration air, can be reached quick and easy |
| Fan: | A common chamber fan for the process and regeneration air, directly driven |
| Sorption rotor: |
SSCR-U, d 450mm x h 50mm
|
| Rotor drive: | Rotormotor with belt drive and belt tensioner |
| Regeneration heating: | Electrical PTC heating, self-regulating and with overheat protection, with ammeter for easy regulation of air flow |
| Electrical equipment: | All components wired to terminal, On / Off and Man / Auto switch, with ammeter, operating hours counter and hygrostat connection socket, standard configuration |
| Controlling: | Prepared for hygrostat connection |
| Signal: |
Remote-ON/OFF
|
| Supply: | 230V CEE cable with 2m cable |
| Operating hours counter: | Standard |
| Device connection socket: | Standard |
| Hygrostat/remote-ON: |
