Sorption dehumidifier R-061

  • Stainless steel housing
  • SSCR sorption rotor
  • Separate control of process and regeneration air flow
  • Electric PTC heater
  • Internal heat recovery of regeneration air flow

Specifikations/Instructions:

Download Data sheet_R-51__61R-DE.pdf (402.72 KB)
Download Dimensions_R061.pdf (61.43 KB)

Send a request
Adsorptionstrockner ROTOR - K.i.R.S.C.H.Adsorptionstrockner ROTOR - K.i.R.S.C.H.Adsorptionstrockner ROTOR - K.i.R.S.C.H.
Dehumidification capacity at 20° C and 60% rel. humidity: 10 kg/h
Dehumidifying performance at 30° C and 80% rel. humidity: 12,8 kg/h
Dehumidifying performance at 10° C and 70% rel. humidity: 7 kg/h
Dehumidification capacity at 0° C and 90% rel. humidity: 5,1 kg/h
Process air flow, nominal, ext. pressure:
 1.450 m³/h, at 100 Pa ext.
Regeneration air flow, nominal, ext. pressure: 580 m³/h, at 200 Pa ext.
Working temperature: -20 to +35 °C
Working range humidity: 10 – 100 % rF
El. heating capacity, max.: 13,5 kW
Electrical power, max.: 1,2 kW
Total power, max.: 14,7 kW
Connection voltage: 3x 400V, 50 Hz
Fuse: 25 A
Required switching for remote control (e.g., hygrostat or remote ON): 1 A (control voltage)
Height (total): 1080 mm
Width (total): 845 mm
Deep (total): 620 mm
Weight: 110 kg
Inlet process air: 250 mm
Outlet process air (dry air): 250 mm
Inlet regeneration air: 160 mm
Outlet regeneration air (wet air): 160 mm
Rotor speed: 42 1/h
Noise level, with connected ducting, 1m free-field: < 83 dB(A)
Filter class: G3
Working principle: RECUSORB
Installation: Stationary, standing
Wet air exhaust: Required
Housing: Stainless steel selfstanding
Maintenance Accessibility: From the front and from the left
Filter: Separate G3 filter for the process and regeneration air, can be reached quick and easy
Fan: Separate radial fan for the process and regeneration air, both fans directly driven
Sorption rotor: SSCR-U, d 550mm x h 100mm
Rotor drive:
Belt driven rotor motor with belt tensioner
Regeneration heater: Electrical PTC-heater, two fase (9 + 4,5) kW and with overheat protection
Regeneration heating, alternativ: Steam
Thermostatic system: Consisting of safety temperature limiter and damp-air temperature limiter
Electrical equipment:
All components wired to serial terminal, main switch, On / Off buttons and Man / Auto switch, heating level selector switch, indicator light for operation and fault, operating hours counter, control voltage transformer, motor protection groups, automatic backup devices
Control: Two-stage heating system controllable by hygrostat
Signal: Remote-ON/OFF, Fault message
Supply: No
Operating hours counter: Standard
Device connection socket: No
Hygrostat/Remote-ON:
Teilen Sie den Inhalt mit Ihren Kontakten...
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on Google+
Google+
Share on LinkedIn
Linkedin
Email this to someone
email
Share on Xing
Xing