Sorption dehumidifier DC-0102016-11-16T10:30:57+02:00

Sorption dehumidifier DC-010

  • Stainless steel housing
  • SSCR – sorption rotor
  • Separate guidance of the process and regeneration air
  • Electric PTC regeneration heating
  • Ammeter for regenerating air

Specifications / Instructions:

Download Data sheet_DC-10_DE.pdf (413.75 KB)
Download Dimension drawing_DC-10.pdf (46.2 KB)

Send a request
Dehumidification capacity at 20 ° C and 60% rel. humidity:
0,6 kg/h
Dehumidification capacity at 30°C and 80 % rel. humidity: 0,68 kg/h
Dehumidification capacity at 10°C and 70 % rel. humidity: 0,48 kg/h
Dehumidification capacity at 0°C and 90 % rel. humidity: 0,33 kg/h
Process air flow, nominally, at ext. pressure: 190 m³/h, free outlet
Regeneration air flow, nominal, at ext. pressure: 60 m³/h, free outlet
Working environment temperature: -20 to +35 °C
Working range humidity: 10 – 100 % rF
El. heater power, max.: 1 kW
El. motor power, max.: 0,3 kW
El. total consumption, max.: 1,3 kW
Supply voltage: 1x 230V, 50 Hz
Fuse: 10 A
Required switch for wireless contact (for example, humidistat or remote ON): 5 A
Hight (total): 660 mm
Width (total): 314 mm
Depth (total): 245 mm
Weight: 15 kg
Inlet process air: 100 mm
Outlet process air (dry air): 100 mm
Inlet regeneration air: 80 mm
Outlet regeneration air (wet air): 80 mm
Rotor speed: 36 1/h
Filter class: G3
Working principle: CONSORB
Installation: Mobile and stationary, standing
Wet air exhaust: Required
Housing: Stainless steel, self standing
Maintenance accessibility: From the front and sides
Air filter, filter class: G3 filter for process and regeneration air with easy access
Fan: Centrifugal fan for process and regeneration air, all fans directly driven
Sorption rotor: SSCR-U, d 180mm x h 50mm
Rotor drive: Rotor motor with belt drive and belt tensioner
Regeneration heating: Electrical PTC heater, self-regulating with overheating protection and ammeter for easy reg. air flow adjustment
Electrical equipment:
 All components wired to terminal, On / Off and Man / Auto switch, with ammeter, standard configuration
 Control: Hygrostat connection possible
 Signal:  Remote ON / OFF
 Supply:  Safety plug with 2m supply cable
 Operating hours counter:  Optional
 Socket:  Optional
 Hygrostat / remote ON:
Teilen Sie den Inhalt mit Ihren Kontakten...
Print this page
Print
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on LinkedIn
Linkedin
Email this to someone
email
Share on Xing
Xing