Sorption dehumidifier RZ-101


[fusion_button link=”” color=”default” size=”” type=”” shape=”” target=”_self” title=”” gradient_colors=”

” gradient_hover_colors=”

” accent_color=”” accent_hover_color=”” bevel_color=”” border_width=”1px” shadow=”” icon=”fa-check-circle-o” icon_position=”left” icon_divider=”no” modal=”” animation_type=”0″ animation_direction=”left” animation_speed=”1″ alignment=”right” class=”” id=””]Send a request[/fusion_button]Adsorptionstrockner ROTOR - K.i.R.S.C.H.Adsorptionstrockner ROTOR - K.i.R.S.C.H.Adsorptionstrockner ROTOR - K.i.R.S.C.H.
Dehumidification capacity at 20° C and 60% rel. humidity: 30 kg/h
Dehumidification capacity at 30° C and 80% rel. humidity: 38,4 kg/h
Dehumidification capacity at 10° C and 70% rel. humidity: 21 kg/h
Dehumidification capacity at 0° C and 90% rel. humidity: 15,3 kg/h
Process airflow, nominal, ext. pressure:
4.500 m³/h, at 400 Pa ext.
Regeneration airflow, nominal, ext. pressure: 1.800 m³/h, at 200 Pa ext.
Working temperature: -20 to +35 °C
Working range humidity: 10 – 100 % rF
El. heating capacity, max.: 40 kW
Electrical power, max.: 4,5 kW
Total power, max.: 44,5 kW
Supply voltage: 3x 400V, 50 Hz
Fuse: 80 A
Required switching for remote controlling (e.g., hygrostat or remote ON): 1 A (control voltage)
Height (total): 1850 mm
Width (total): 2092 mm
Deep (total): 1340 mm
Weight: 380 kg
Inlet process air: 500 mm
Outlet process air (dry air): 400 mm
Inlet regeneration air: 315 mm
Outlet regeneration air (wet air): 250 mm
Rotor speed: 49 1/h
Filter class: G3
Applications: Diverse application areas, to achieve the lowest relative humidity, to dry specific air volumes to specific values, at low temperatures, with wet air extraction to the outside
Working principle: RECUSORB
Instalation: Stationary, standing
Wet air extraction: Required
Housing: Steel, galvanized, self-supporting
Maintenance accessibility:: From the front
Filter: G3 bag filters for process air and regeneration air, easy and quick access.
Fan: Separate radial fan for process air and reg. air, both direct driven and mounted externally
Sorption rotor: SSCR-U, d 965mm x h 100mm
Rotor drive: Belt driven rotor motor with belt tensioner
Regeneration heating: Electrical PTC heater, thermostatically controlled, seven-stage, total 40 kW
Regeneration heating, alternative: Steam, Gas
Thermostat system: Consisting of safety temperature limiter, control thermostat and wet air temperature limiter
Electrical equipment: All components wired to terminal block, main switch, dehumidifier program controller DST C1 with clear display for operating status, operating hours and error messages, control voltage transformer, motor protection groups, fuse automation
Control: (0%, 58%, 100% power), optionally step-by-step or linear heater control via 0-10V control signal
Signal: Remote-ON/OFF, fault alarm
Supply cable: No
Operationg hours counter: Standard
Device connection socket: No