Sorption dehumidifier DR-010B
- Stainless steel housing
- SSCR-sorption rotor
- Separate guidance of the process and regeneration air
- Electric PTC regeneration heating
- Ammeter for regeneration air settings
Data sheet/Instructions:
Download Dimensions_DR-010B.pdf (44.19 KB)
Download Data sheet_DR-010B-DE.pdf (417.65 KB)
| Dehumidification capacity at 20 ° C and 60% rel. humidity: | 0,5 kg/h |
| Dehumidification capacity at 30 ° C and 80% rel. humidit: | 0,64 kg/h |
| Dehumidification capacity at 10 ° C and 70% rel. humidity: | 0,35 kg/h |
| Dehumidification capacity at 0 ° C and 90% rel. humidity: | 0,26 kg/h |
| Process air flow, nominal, at ext. pressure: | 190 m³/h, free outlet |
| Regeneration air flow, nominal, at ext. pressure: | 40 m³/h, free outlet |
| Working environment temperature: | -20 to +35 °C |
| Working range humidity: | 10 – 100 % rF |
| El. heater power, max.: | 0,7 kW |
| El. engine power, max.: | 0,2 kW |
| El. total consumption, max.: | 0,9 kW |
| Supply voltage: | 1x 230V, 50 Hz |
| Fuse: | 10 A |
| Required switch for wireless contact (for example, humidistat or remote ON): | 5 A |
| Hight (total): | 530 mm |
| Width (total): | 314 mm |
| Deep (total): | 245 mm |
| Weight: | 12 kg |
| Inlet process air: | 100 mm |
| Outlet process air (dry air): | 100 mm |
| Inlet regeneration air: | 80 mm |
| Outlet regeneration air (wet air): | 80 mm |
| Rotor speed: | 36 1/h |
| Noise, with associated pipelines, 1m free field: | < 56 dB(A) |
| Filter class: | G3 |
| Spplication range: | Diverse application range, to achieve the lowest relative humidity, to dry air to a specific value, or at low temperatures, with wet air exhaust to the outside |
| Working principle: | RECUSORB |
| Installation: | Mobile and stationary, standing |
| Wet air exhaust: | Required |
| Housing: | Stainless steel, self standing |
| Maintenance accessibility: | From the front and side |
| Air filter, filter class: | A common G3 filter for process and regeneration air, reachable quickly and easily |
| Fan: |
Directly powered by a common centrifugal fan for process and regeneration air
|
| Sorption rotor: | SSCR-U, d 180mm x h 50mm |
| Rotor drive: | Rotor motor with belt drive and belt tensioner |
| Regeneration heating: | Electrical PTC heater, self-regulating, with overheating protection anda mmeter for easy reg. airflow adjustment |
| Electrical equipment: | All components wired to terminal, On / Off and Man / Auto switch, with ammeter, standard configuration |
| Controlling: | Hygrostat connection possible |
| Signal: |
Remote-ON/OFF
|
| Supply: | Safety plug with 2m supply cable |
| Operating hours counter: | Optionally available |
| Device socket: | Optionally available |
| Hygrostat/Remote-ON: |
