Sorption dehumidifier DR-031C
- Stainless steel housing
- SSCR sorption rotor
- Separate guidance of the process and regeneration air
- Electric PTC regeneration heater
- Ammeter for regeneration airflow settings
Specifications / Instructions:
Download Data sheet_DR-31_T10-DE.pdf (212.13 KB)
Download Dimensions_DR-31.pdf (59.44 KB)
| Dehumidification capacity at 20° C and 60% rel. humidity: | 1,6 kg/h |
| Dehumidification capacity at 30° C and 80% rel. humidity: | 2,05 kg/h |
| Dehumidification capacity at 10° C and 70% rel. humidity: | 1,12 kg/h |
| Dehumidification capacity at 0° C and 90% rel. humidity: | 0,82 kg/h |
| Process air flow, nominal, at ext. pressure: |
310 m³/h, at 350 Pa ext.
|
| Regeneration air flow, nominal, at ext. pressure: | 110 m³/h, free blowing |
| Working environment temperature: | -20 to +35 °C |
| Working range humidity: | 10 – 100 % rF |
| El. heater power, max.: | 1,84 kW |
| El. motor power, max.: | 0,32 kW |
| El. total consumption, max.: | 2,16 kW |
| Supply voltage: | 1x 230V, 50 Hz |
| Fuse: | 10 A |
| Required switching for wireless performance (for example, humidistat or remote ON): | 10 A |
| Hight (total): | 464 mm |
| Width (total): | 453 mm |
| Deep (total): | 480 mm |
| Weight: | 28 kg |
| Intake process air: | 160 mm |
| Outlet (dry air): | 160 mm |
| Intake regeneration air: | 100 mm |
| Outlet regeneration air (wet air): | 80 mm |
| Rotor speed: | 24 1/h |
| Noise, with associated ducting, 1m free field: | < 58 dB(A) |
| Filter class: | G3 |
| Working principle: | RECUSORB |
| Installation: | Mobile und stationary, standing |
| Wet air exhaust: | Required |
| Housing: | Stainless steel, self standing |
| Maintenance accessibility: | From the front and from above |
| Air filter: |
Common G3 filter for process and regeneration air to reach quickly and easily
|
| Fan: | Common centrifugal fan for process and regeneration air, directly powered by |
| Sorption rotor: | SSCR-U, d 300mm x h 100mm |
| Rotor drive: | Rotor motor with belt drive and belt tensioner |
| Regeneration heater: | Electric PTC-heater, self-regulating and with overheat protection, with ammeter for easy reg. airflow adjustment |
| Electric equipment: | All components wired to terminal, On / Off and Man / Auto switch, with ammeter, operation hour counter, and humidistat socket, standard configuration |
| Controlling: | Prepared for hygrostat connection |
| Signal: |
Remote-ON/OFF
|
| Supply: | Safety plug with 2m supply cable |
| Operating hours counter: | Optionally available |
| Device socket: | Optional |
| Hygrostat/Remote-ON: |
