DanX XKS swimming pool dehumidification

Swimming pool dehumidification with cross-flow heat exchanger.

The XKS is a dehumidification system with a highly efficient cross-flow heat exchanger. This system precisely controls humidity and room temperature while significantly reducing operating costs through energy savings of up to 80%.

DanX XKS night and day mode with heating: Partial recirculation with heating, single-stage heat recovery and dehumidification with outside air.

The integrated mixing chamber ensures that only the exact amount of outside air required is supplied, reducing operating costs to a minimum.

Application

• Hotel swimming pools
• Wellness facilities
• Leisure centers
• Public swimming pools
• Adventure pools
• Spa facilities

Features and benefits

• User-friendly control system with demand control. Automatic monitoring and control of temperature, humidity and energy consumption.
• Highly efficient cross-flow heat exchangers made of epoxy-coated aluminum protect the DanX device against the aggressive climate in swimming pools.
• Heat pump with high COP values and optional water-cooled condenser.
• Strong housing made of hot-dip galvanized closed frames, fixed with aluminium corners and insulated inside with mineral wool. (DanX HP & XD: self-supporting sandwich construction with base frame and adjustable feet).
• Hot-dip galvanized sandwich panels with 50 mm insulation (thermal transmittance factor T3 / thermal bridge factor TB3 / air leakage L3 according to EN 1886).
• Internal partition walls are 30 mm thick and made of hot-dip galvanized 1.25 mm sheet steel insulated with mineral wool.
• Inspection openings are designed as doors with fixed hinges and handles or square.
• Optionally, all internal components including fans and cover plates are powder-coated separately before assembly (corrosion class C4).
• If the device is installed outdoors in an aggressive environment, a 70 μm powder coating is available on the surfaces of the external cover plates.
• All screws, nuts and bolts are made of stainless steel or are specially protected.
• Condenser, evaporator and heating surfaces are epoxy-coated.
• Replaceable droplet separator for air velocities of up to 4 m/s.
• IP 66 damper motors for aggressive environments.
• Our indoor swimming pool equipment is based on 30 years of experience and has been specially developed for the aggressive climate in indoor swimming pools.
• “All-in-one box” solution.