DanX large room ventilation

Large room ventilation for hotels and office buildings.

The modular, high-performance DanX ventilation units for large rooms regulate air purity, temperature and humidity in hotels, offices and all rooms where high air quality is required. With Dantherm’s all-in-one concept, DanX guarantees reliable operation and uncomplicated handling.open-plan ventilation for hotels and office buildings. The modular, high-performance DanX ventilation units for large rooms regulate air purity, temperature and humidity in hotels, offices and all rooms where high air quality is required. With Dantherm’s all-in-one concept, DanX guarantees reliable operation and uncomplicated handling.

Thanks to the flexible concept, the functional scope of the DanX appliances can be precisely defined. The appliance can be equipped with a reversible compressor heat pump to provide cooling in summer and heating in winter. The exchanger surfaces are defrosted directly in the heat pump circuit by automatically switching the evaporator and condenser functions.

Application

• Office building
• Hotels
• Schools
• Shopping centers
• Changing rooms
• Amusement parks
• Concert halls
• Cinemas

Features and benefits

• User-friendly control system with demand control. Automatic monitoring and control of temperature, humidity and energy consumption.
• Strong housing made of hot-dip galvanized closed frames, fixed with aluminium corners and insulated inside with mineral wool.
• Hot-dip galvanized sandwich panels with 50 mm insulation (thermal transmittance factor T3 / thermal bridge factor TB3 / air leakage L3 according to EN 1886).
• Internal partition walls are 30 mm thick and made of hot-dip galvanized 1.25 mm sheet steel insulated with mineral wool.
• Inspection openings are designed as doors with fixed hinges and handles or square.
• Very efficient cross-flow heat exchanger.
• Heat pump with high COP values. The compressor can optionally be equipped with a frequency converter for precise temperature control and VAV system. Low energy consumption and long service life.
• Optionally, all internal components including fans and cover plates are powder-coated separately before assembly (corrosion class C4).
• If the device is installed outdoors in an aggressive environment, a 70 μm powder coating is available on the surfaces of the external cover plates.
• All screws, nuts and bolts are made of stainless steel or are specially protected.
• Condenser, evaporator and heating surfaces are epoxy-coated.
• Replaceable droplet separator for air velocities of up to 4 m/s.
• “All-in-one box” solution.
• Very good heat recovery.
• “Plug-and-play” concept.
• Based on 30 years of experience.