GANN Hydromette Classic Series – RTU 600

The RTU 600 is a combined electronic 4-fold measuring device for recording wood moisture, building moisture, air humidity and temperature, equipped with universal wood type correction for every type of wood and automatic temperature compensation.
The multifunctional character of the Hydromette allows the connection of an enormous number of (active) electrodes as well as the use of all resistance-based wood moisture and building moisture electrodes.

• B 50, B 60 and LB 71 for non-destructive moisture measurement and indication in ceilings, walls, floors and other building materials
• MB 35 for surface moisture measurement on concrete
• MH 34 for measuring high moisture values (40 – 200 %) in softwood
• IR 40 EL for recording surface temperature, thermal bridges and dew point temperature
• RF-T 28, RH-T 37 EL and RH-T 37 EL flex for air humidity and air temperature measurement
• all our Pt 100 temperature sensors

This measuring device is particularly suitable for painters, interior fitters, parquet installers, parquet factories, wood processing companies, technical wood drying, construction companies, architects, experts, housing construction companies and building construction offices.

Measuring ranges:

• Building moisture:
  • for resistance-based measurements: (*)
    0 – 80 digits
    0.3 – 25 wt.-% or 0.3 – 12 CM-%
  • for capacitive measurements: (*)
    0 – 199 digits (scan range)
    0.3 – 8.5 wt.-% or 0.3 – 6.5 CM-% with B 50, B 60 and LB 70
    2 – 8 wt.-% with MB 35 on concrete surfaces
  • when measuring the relative humidity in the borehole: (*)
    5 – 98 % r.h. or
    0.2 – 3.7 % by weight with RH-T 37 EL and RH-T 37 EL flex
• (wood moisture):
  4 – 100 % (atro) with resistance-based measuring methods
  40 – 200 % (atro) with MH 34 on softwood
• Humidity:
  5 – 98 % r.h. with RF-T 28, RH-T 37 EL and RH-T 37 EL flex
• Temperature:
  -200 – +600 °C depending on Pt 100 temperature sensor
• Infrared measuring range:
  -20 – +199.9 °C with IR 40 EL

(*) = Moisture conversion in % depending on building material via conversion table

Properties:

• Handy quick moisture meter for lightning-fast individual and series measurements
• Direct display of the humidity values via the large LCD display, resolution: 0.1 % or 0.1° C
• The 81-stage wood type correction allows very precise measurements for the selected wood type by specifying a type-specific calibration curve code number
• Automatic compensation of the wood temperature in the range of -10° – +90° C
• Fast measurement of moisture in set building materials thanks to the non-resistance and non-destructive building moisture indication using the capacitive high-frequency measuring method
• Precise temperature measurement thanks to Pt 100 measuring resistors in 4-wire technology
• Fully automatic device synchronization
• Power supply: 9 V block battery
• Dimensions: 180 [L] x 115 [W] x 53 mm [H], weight approx. 390 g