GANN Hydromette Classic Series – COMPACT
- Handy pocket-sized quick moisture meter for lightning-fast single or series measurements
- Two-stage wood grade correction
- Plaster moisture measurement with direct display in % by weight, with large 3-digit LCD display
- Fully automatic device synchronization
Product description
The Hydromette Compact is an electronic wood and plaster moisture meter basedon the resistance measuring principle.
The ergonomically designed housing is enclosed by the entire palm of the hand so that the measuring tips attached to the top of the device can be pressed into the material to be measured. The thin tips make it possible to detect moisture in sawn timber, chipboard, veneer and wood fiber materials (up to max. 25 mm thick) as well as in normal gypsum or mixed plaster.
An ideal second appliance for painters, interior decorators and professional DIY enthusiasts.
The device is supplied complete with battery, spare electrodes and protective cap.
Measuring ranges:
- Wood moisture content:
5 – 20 % (atro) - Building moisture:
0.3 – 3.5 % by weight (plaster moisture)
(*) = Moisture conversion in % depending on building material via conversion table
Properties:
- Handy, pocket-sized quick moisture meter for lightning-fast individual or series measurements
- Two-stage wood grade correction
- Plaster moisture measurement with direct display in % by weight, with large 3-digit LCD display
- Fully automatic device synchronization
- No separate electrodes or cables required
- Power supply: 9 V block battery
- Dimensions: 200 [L] x 35 [W] x 35 mm [H], weight approx. 130 g
Product information
| Hersteller / Marke | GANN |
| Measurement principle | Resistance measurement |
| Measuring range wood moisture | 5 – 20 % atro |
| Measurement range for construction moisture | 0.3 – 3.5 % by weight (plaster moisture) |
| Material depth (measured material) | up to max. 25 mm |
| Wood species correction | 2 levels |
| Display | 3-digit LCD display, directly in weight-% |
| Device calibration | Fully automatic |
| Operation | Direct measurement without cables/accessories |
| Power supply | 9 V block battery |
| Dimensions | 200 × 35 × 35 mm |
| Weight | approx. 130 g |
| Scope of delivery | Device, battery, replacement tips, protective cap |
Personal advice?
Can’t decide on the right product for your purposes? Then contact us for a personal consultation.
Quality – Reliability – Respect
We live these values. They are constant for us. We want to grow profitably and sustainably, thereby preserving our independence and freedom of action.
The customer is our focus. They shape the way we think and act. Our customers value us as an attractive, innovative and flexible partner. We are “Best in Class”.
Motivated and well-trained employees are our most important asset. We encourage and challenge them. We act responsibly towards society and the environment.
Further products
- Thermal conductivity (λD): 0.059 W/m*K
- Building material class: A1 (non-combustible)
- Porosity: > 90%
- Power: 210 W
- Dimensions: 700 × 370 × 45 mm
- Weight: 3.1 kg
- Construction moisture: 0 – 100 digits
- Measurement method: Non-destructive
- Application: Preliminary test for CM measurement
- Turbines – Type: 0.9
- Air flow: Up to 145 m³/h
- Max. pressure/vacuum: +200 mbar / -170 mbar
- Dimensions: 10 × 0.8 × 300 mm
- Application: Screed joints
- Insulated: Yes
- Wood moisture: 4 - 100%
- Construction moisture: up to 25% by weight
- Temperature: -30 to +170 °C
- Turbines – Type: 1.1
- Air flow: Up to 145 m³/h
- Max. pressure/vacuum: +200 mbar / -170 mbar
- Maximum dehumidification capacity: 28 l/24h
- Dimensions H/W/D in mm: 600/380/360
- Operating range volume: up to 510 m³/h
- Wood moisture: 6 – 25 %
- Building moisture: 0.4 – 6.0 %
- Depth: up to 25 mm
