Edge rail LS200
The LS200 edge rail is ideal for drying insulation layers. They are characterized by optimized air outlets directly in the insulation layer area. This enables flow pressure-optimized operation in both suction and blowing mode.
Product information
| Hersteller / Marke | K.I.R.S.C.H. |
Personal advice?
Can’t decide on the right product for your purposes? Then contact us for a personal consultation.
Quality – Reliability – Respect
We live these values. They are constant for us. We want to grow profitably and sustainably, thereby preserving our independence and freedom of action.
The customer is our focus. They shape the way we think and act. Our customers value us as an attractive, innovative and flexible partner. We are “Best in Class”.
Motivated and well-trained employees are our most important asset. We encourage and challenge them. We act responsibly towards society and the environment.
Further products
- Humidity: 7–98% RH
- Temperature: –10 to +80 °C
- Response time: approx. 20 s
- Measuring range: 10A
- IP protection class: IP54
- Rotation range: 90°
- Measurement range: 0–199 digits
- Application: Non-destructive measurement of construction moisture
- Measuring principle: Capacitive (HF)
- Turbines – Type: 0.9
- Air flow: Up to 145 m³/h
- Max. pressure/vacuum: +200 mbar / -170 mbar
- Dimensions: 10 × 0.8 × 300 mm
- Application: Screed joints
- Insulated: Yes
- Max. flow rate: 8 m³/h
- Max. delivery height: 5 m
- Current consumption: 1.3 A
- Thermal conductivity (λD): 0.059 W/m*K
- Building material class: A1 (non-combustible)
- Porosity: > 90%
- Air output: 6,900 m³/h
- Motor power: 150 W
- Rotation speed: 1,310 rpm
