Edge rail LS100
The LS100 edge rail is perfect for drying insulation layers. They are characterized by optimized air outlets directly in the insulation layer area. This enables flow pressure-optimized operation in both suction and blowing mode.
Product information
| Hersteller / Marke | K.I.R.S.C.H. |
Personal advice?
Can’t decide on the right product for your purposes? Then contact us for a personal consultation.
Quality – Reliability – Respect
We live these values. They are constant for us. We want to grow profitably and sustainably, thereby preserving our independence and freedom of action.
The customer is our focus. They shape the way we think and act. Our customers value us as an attractive, innovative and flexible partner. We are “Best in Class”.
Motivated and well-trained employees are our most important asset. We encourage and challenge them. We act responsibly towards society and the environment.
Further products
- Maximum dehumidification capacity: 10.8l/24h
- Dimensions H/W/D in mm: 600/380/360
- Operating volume range: up to 510m³/h
- Wood moisture content: 6 - 25 %
- Building moisture: 0.4 - 6.0 %
- Depth: up to 25 mm
- Thermal conductivity (λD): 0.059 W/m*K
- Building material class: A1 (non-combustible)
- Porosity: > 90%
- For wood up to 50 mm
- Tips: 16 & 23 mm
- Material: Plastic housing
- Wood moisture: 4 - 100%
- Construction moisture: up to 25% by weight
- Temperature: –200 to +600 °C
- Dimensions: 10 × 0.8 × 300 mm
- Application: Screed joints
- Insulated: Yes
- Humidity: 7–98% RH
- Temperature: –10 to +80 °C
- Response time: approx. 20 s
- Length: approx. 300 mm
- Material: V2A stainless steel
- Application: Depth measurement wood/building material
