Adsorption dryer type DR-050
- Stainless steel housing
- SSCR rotary adsorber
- common routing of process and regeneration air
- with electric resistance regeneration heating
- with internal regeneration heat recovery
Product description
The DR-050 desiccant dryer has been specially developed for energy-efficient use in demanding dehumidification environments. Thanks to the joint process and regeneration air ducting and integrated heat recovery, the appliance is particularly economical. The self-supporting stainless steel housing makes it durable and robust in stationary use – ideal for industry, construction or climate-critical storage areas.
The built-in SSCR rotary adsorber guarantees high dehumidification performance even at low temperatures and high humidity. The electric regeneration heater with multi-stage safety thermostat system ensures reliable operational readiness and protects the appliance from overheating. The standard-compliant wiring, optional hygrostat control and extensive safety features (collective fault signal, operating hours counter, motor protection groups) make the DR-050 a versatile dehumidifier of the highest standard.
Features
- SSCR rotary adsorber with internal heat recovery
- Robust, self-supporting stainless steel housing
- Electric regeneration heater with safety thermostat system
- Remote ON/OFF function and collective fault message
- Integrated operating hours counter and hygrostat connection
- Easy to maintain due to frontal accessibility
Documents
Do you need more information? Then download our documents on the product " Adsorption dryer type DR-050" down.
Product video
Product information
| Hersteller / Marke | Seibu Giken DST |
| Application areaInstallation method | versatile application area, for achieving lowest residual moisture, for drying specific air volumes or at low temperatures, with humid air discharge to the outside |
| Working principle: | RECUSORB |
| Installation method: | stationary, standing |
| Wet air discharge: | Required |
| Housing: | Stainless steel, self-supporting |
| Maintenance accessibility: | from front and top |
| Air filter, filter class: | one G4 filter each for process and regeneration air, quickly and easily accessible |
| Fan: | a common chamber fan for process and regeneration air, directly driven |
| Dehumidification rotor: | SSCR-U, d 450mm x h 50mm |
| Rotor drive: | Rotor motor with belt drive and belt tensioning device |
| Regeneration heating: | electric resistance heating, thermostatically protected, |
| Thermostat system: | consisting of safety temperature limiter, control thermostat and wet air safety temperature limiter |
| Electrical equipment: | all components wired to terminal strip, main switch, On/Off buttons and Man/Auto switch, indicator lights for operation and fault, operating hours counter and hygrostat connection box, control voltage transformer, motor protection groups, circuit breakers, |
| Controllability: | prepared for hygrostat connection |
| Signal exchange: | Remote ON/OFF, collective fault message |
| Power supply: | 400V CEE cable plug with 2m supply line |
| Operating hours counter: | Standard |
| Device connection socket: | Standard |
| Hygrostat/Remote ON: |
Technical details
| Dehumidification capacity at 20°C and 60% rel. humidity: | 2.8 kg/h |
| Dehumidification capacity at 30°C and 80% rel. humidity: | 3.58 kg/h |
| Dehumidification capacity at 10°C and 70% rel. humidity: | 1.96 kg/h |
| Dehumidification capacity at 0°C and 90% rel. humidity: | 1.43 kg/h |
| Process air volume, nominal, at ext. pressure: |
600 m³/h, at 150 Pa ext.
|
| Regeneration air volume, nominal, at ext. pressure: | 150 m³/h, at 100 Pa ext. |
| Operating temperature range: | -20 to +35 °C |
| Operating humidity range: | 10 – 100 % RH |
| El. heater power, max.: | 4 kW |
| El. motor power, max.: | 0.2 kW |
| Total el. connected load, max.: | 4.2 kW |
| Supply voltage: | 3x 400V, 50 Hz |
| Fuse protection: | 10 A |
| required switching capacity for remote switching contact (e.g. hygrostat or remote ON): | 1 A (control voltage) |
| Height (overall): | 619 mm |
| Width (overall): | 670 mm |
| Depth (overall): | 578 mm |
| Weight: | 60 kg |
| Process air inlet: | 160 mm |
| Process air outlet (dry air): | 160 mm |
| Regeneration air inlet: | 100 mm |
| Regeneration air outlet (humid air): | 100 mm |
| Rotor speed: | 30 1/h |
| Noise level, with connected pipework, 1m free field: | |
| Filter class: | G4 |
Personal advice?
Can’t decide on the right product for your purposes? Then contact us for a personal consultation.
Quality – Reliability – Respect
We live these values. They are constant for us. We want to grow profitably and sustainably, thereby preserving our independence and freedom of action.
The customer is our focus. They shape the way we think and act. Our customers value us as an attractive, innovative and flexible partner. We are “Best in Class”.
Motivated and well-trained employees are our most important asset. We encourage and challenge them. We act responsibly towards society and the environment.
Further products
- Dehumidification capacity: up to 69 kg/h
- Dry air volume flow: 9,000 m³/h
- Total connected load: 79.7 kW
- Dehumidification capacity: up to 30 kg/h
- Dry air volume flow: up to 3,500 m³/h
- Total connected load: 34 kW
- Dehumidification capacity: up to 1.5 kg/h
- Air volume flow: 310 – 400 m³/h
- Wet air discharge required
- Dehumidification capacity: up to 5 kg/h
- Dry air volume flow: up to 1,000 m³/h
- Total connected load: up to 8.3 kW
- Dehumidification capacity: up to 13.6 kg/h
- Dry air volume flow: up to 1,800 m³/h
- Total connected load: up to 15.6 kW
- Dehumidification capacity: 0.6 kg/h
- Air volume flow: 190 m³/h
- Wet air discharge required
- Dehumidification capacity: 1.1 kg/h
- Dry air volume flow: 360 m³/h
- Power consumption: 1.72 kW
- Dehumidification capacity (20 °C / 60 % RH): 1.6 kg/h
- Dry air volume flow: 310 m³/h
- Total connected load: 2.16 kW
- Dehumidification capacity: up to 2.1 kg/h
- Air volume flow: 300 – 490 m³/h
- Wet air discharge required
- Dehumidification capacity: 1.6 kg/h
- Dry air volume flow: 600 m³/h
- Power consumption: 1.72 kW
