RECUSORB adsorption dryer

  • Maximum efficiency thanks to internal regeneration heat recovery
  • Constant dehumidification performance even at low temperatures
  • Robust stainless steel housing for continuous industrial use
  • Modular design for stationary or mobile operation
RECUSORB Prinzip Illustration

All RECUSORB adsorption dryer

RECUSORB adsorption dryer: 14 Products
  • Construction dryer type KT95evo
    Adsorption dryer type DR-010B
    • Dehumidification capacity: 0.5 kg/h
    • Process air volume: 190 m³/h
    • Power consumption: 0.9 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-020
    • Dehumidification capacity: 0.8 kg/h
    • Dry air volume flow: 330 m³/h
    • Power consumption: 1.2 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-030D
    • Dehumidification capacity: 1.1 kg/h
    • Dry air volume flow: 360 m³/h
    • Power consumption: 1.72 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-031 T10
    • Dehumidification capacity (20 °C / 60 % RH): 1.6 kg/h
    • Dry air volume flow: 310 m³/h
    • Total connected load: 2.16 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-040-T10
    • Dehumidification capacity: 1.6 kg/h
    • Dry air volume flow: 600 m³/h
    • Power consumption: 1.72 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-040-T16
    • Dehumidification capacity: 2.3 kg/h
    • Dry air volume flow: 550 m³/h
    • Power consumption: 3.3 kW
  • Construction dryer type KT95evo
    Adsorption dryer type DR-050
    • Dehumidification capacity: 2.8 kg/h (at 20 °C, 60% RH)
    • Dry air volume flow: 600 m³/h
    • Total connected load: 4.2 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RL 061 / 061L
    • Dehumidification capacity: up to 13.6 kg/h
    • Dry air volume flow: up to 1,800 m³/h
    • Total connected load: up to 15.6 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RL-60R / RL-60LR
    • Dehumidification capacity: up to 5 kg/h
    • Dry air volume flow: up to 1,000 m³/h
    • Total connected load: up to 8.3 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RLZ-081
    • Dehumidification capacity (20 °C, 60% RH): 19 kg/h
    • Dry air volume flow: 2,900 m³/h
    • Total connected load: 27.6 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RLZ-082
    • Dehumidification capacity: up to 30 kg/h
    • Dry air volume flow: up to 3,500 m³/h
    • Total connected load: 34 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RLZ-101
    • Dehumidification capacity (20 °C / 60 % RH): 34 kg/h
    • Dry air volume flow: 9,000 m³/h
    • Total connected load: 46.3 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RLZ-102
    • Dehumidification capacity: up to 69 kg/h
    • Dry air volume flow: 9,000 m³/h
    • Total connected load: 79.7 kW
  • Construction dryer type KT95evo
    Adsorption dryer type RLZ-104
    • Dehumidification capacity at 20 °C / 60 % RH: 80 kg/h
    • Dry air volume flow: 10,000 m³/h
    • Total connected load: 85 kW
Building dryer advice

Personal advice?

Can’t decide on the right product for your purposes? Then contact us for a personal consultation.

RECUSORB R – with internal heat recovery

Compared to CONSORB, the RECUSORB principle also works with internal heat recovery.

The incoming regeneration air absorbs the residual regeneration heat from the rotor in the purge zone, is preheated and its water content is reduced. As a result, the regeneration heater consumes less energy and the rotor is regenerated better in accordance with the lower regeneration air humidity.
RECUSORB DR – with common fan

The RECUSORB-DR principle is similar, but only equipped with one fan.

The air flow conveyed by the fan is divided into two air flows (process air and regeneration air) before entering the rotor.