Adsorption dryer type CS-5 / CS-5L
- Stainless steel housing
- D-MAX rotary adsorber
- Separate ducting for process and regeneration air
- With electric PTC regeneration heating
- Ammeter helpful for regeneration air adjustment
Product description
Reliable dehumidification with separate air duct
The CS series relies on the proven CONSORB operating principle, which enables effective separation of process and regeneration air. By using a D-MAX rotary adsorber, moisture is efficiently removed while the humid air is safely discharged to the outside.
Product advantages
✅ Stainless steel housing – durable, robust and corrosion-resistant
✅ D-MAX rotary adsorber – highly efficient moisture absorption, washable
✅ Separate air routing – optimized drying thanks to separate zones for process and regeneration air
✅ Electric PTC regeneration heater – self-regulating, efficient and overheating-proof
✅ Ampèremeter for optimum setting – facilitates precise adjustment of the regeneration air
✅ Maintenance-friendly – easy access from the front and side
✅ Flexible installation – mobile or stationary use
Technical highlights
🔹 Dehumidification performance: 0.35 – 0.4 kg/h (at 20°C, 60 % rH)
🔹 Air volume flow: 65 – 90 m³/h
🔹 Humid air removal required – safe discharge to the outside
🔹 230V mains operation – with Schuko plug (2 m supply cable)
🔹 Hygrostat connection & remote control possible
Areas of application
🔹 Trade & industry: Moisture control in production facilities and warehouses
🔹 Technical rooms: Protecting sensitive systems from corrosion
🔹 Renovation & construction drying: Efficient dehumidification for damp rooms
Documents
Do you need more information? Then download our documents on the product " Adsorption dryer type CS-5 / CS-5L" down.
Product video
Product information
| Hersteller / Marke | Seibu Giken DST |
| Working principle: | CONSORB |
| Installation method: | Mobile and stationary, standing |
| Wet air discharge: | Required |
| Housing: | Stainless steel, self-supporting |
| Maintenance accessibility: | From front and sides |
| Air filter, filter class: | a common G4 filter for process and regeneration air, quick and easy to change |
| Fan: | One radial fan each for process and regeneration air, all fans directly driven |
| Dehumidification rotor: | D-MAX, d 180mm x h 50mm |
| Rotor drive: | Rotor motor with belt drive and belt tensioning device |
| Regeneration heating: | Electric PTC heating, self-regulating and overheating-proof, with ammeter for easy regeneration air volume adjustment |
| Electrical equipment: | All components wired to terminal strip, On/Off and Man/Auto switches, with ammeter, standard-compliant design |
| Controllability: | Hygrostat connection possible |
| Signal exchange: | Remote ON/OFF |
| Supply line | Schuko plug with 2m supply cable |
| Operating hours counter: | Optionally available |
| Device connection box: | Optionally available |
| Hygrostat/Remote ON: |
Technical details
|
Dehumidification capacity at 20°C and 60% rel. humidity:
|
0.35 kg/h |
| Dehumidification capacity at 30°C and 80% rel. humidity: | 0.4 kg/h |
| Dehumidification capacity at 10°C and 70% rel. humidity: | 0.28 kg/h |
| Dehumidification capacity at 0°C and 90% rel. humidity: | 0.2 kg/h |
| Process air volume, nominal, at ext. pressure: | 65 m³/h, at 50 Pa ext. free outlet |
| Regeneration air volume, nominal, at ext. pressure: | 30 m³/h, at 30 Pa ext. free outlet |
| Operating temperature range: | -20 to +35 °C |
| Operating humidity range: | 10 – 100 % RH |
| El. heater power, max.: | 680 W |
| El. motor power, max.: | 20 W |
| Total el. connected load, max.: | 0.7 kW |
| Supply voltage: | 1x 230V, 50 Hz |
| Fuse protection: | 10 A |
| Required switching capacity for remote switching contact (e.g. hygrostat or remote ON): | 5 A |
| Height (overall): | 270 mm |
| Width (overall): | 338 mm |
| Depth (overall): | 279 mm |
| Weight: | 9 kg |
| Process air inlet: | common for process & reg. air, without connection |
| Process air outlet (dry air): | 100 mm |
| Regeneration air inlet: | common for process & reg. air, without connection |
| Regeneration air outlet (moist air): | 50 mm |
| Rotor speed: | 36 1/h |
| Filter class: | G4 |
|
Dehumidification capacity at 20°C and 60% rel. humidity:
|
0.40 kg/h |
| Dehumidification capacity at 30°C and 80% rel. humidity: | 0.45 kg/h |
| Dehumidification capacity at 10°C and 70% rel. humidity: | 0.32 kg/h |
| Dehumidification capacity at 0°C and 90% rel. humidity: | 0.22 kg/h |
| Process air volume, nominal, at ext. pressure: | 90 m³/h, at 100 Pa ext. free outlet |
| Regeneration air volume, nominal, at ext. pressure: | 50 m³/h, at 30 Pa ext. free outlet |
| Operating temperature range: | -20 to +35 °C |
| Operating humidity range: | 10 – 100 % RH |
| El. heater power, max.: | 820 W |
| El. motor power, max.: | approx. 30 W |
| Total el. connected load, max.: | 0.85 kW |
| Supply voltage: | 1x 230V, 50 Hz |
| Fuse protection: | 10 A |
| Required switching capacity for remote switching contact (e.g. hygrostat or remote ON): | 5 A |
| Height (overall): | 270 mm |
| Width (overall): | 338 mm |
| Depth (overall): | 279 mm |
| Weight: | 9 kg |
| Process air inlet: | common for process & reg. air, without connection |
| Process air outlet (dry air): | 100 mm |
| Regeneration air inlet: | common for process & reg. air, without connection |
| Regeneration air outlet (moist air): | 50 mm |
| Rotor speed: | 36 1/h |
| Filter class: | G4 |
Personal advice?
Can’t decide on the right product for your purposes? Then contact us for a personal consultation.
Quality – Reliability – Respect
We live these values. They are constant for us. We want to grow profitably and sustainably, thereby preserving our independence and freedom of action.
The customer is our focus. They shape the way we think and act. Our customers value us as an attractive, innovative and flexible partner. We are “Best in Class”.
Motivated and well-trained employees are our most important asset. We encourage and challenge them. We act responsibly towards society and the environment.
Further products
- Dehumidification capacity: 0.8 kg/h
- Dry air volume flow: 330 m³/h
- Power consumption: 1.2 kW
- Dehumidification capacity: 0.6 kg/h
- Air volume flow: 190 m³/h
- Wet air discharge required
- Dehumidification capacity: 22 – 65 kg/h
- Air volume flow: 3200 – 8000 m³/h
- Moist air discharge required – secure discharge to the outside
- Dehumidification capacity: 0.5 kg/h
- Process air volume: 190 m³/h
- Power consumption: 0.9 kW
- Dehumidification capacity: 2.3 kg/h
- Dry air volume flow: 550 m³/h
- Power consumption: 3.3 kW
- Dehumidification capacity: 4.6 kg/h
- Dry air volume flow: 1,000 m³/h
- Power consumption: 6.4 kW
- Dehumidification capacity: 10 kg/h
- Dry air volume flow: 1,450 m³/h
- Power consumption: 14.7 kW
- Dehumidification capacity: 1.6 kg/h
- Dry air volume flow: 600 m³/h
- Power consumption: 1.72 kW
- Dehumidification capacity at 20 °C / 60 % RH: 80 kg/h
- Dry air volume flow: 10,000 m³/h
- Total connected load: 85 kW
- Dehumidification capacity: up to 5 kg/h
- Dry air volume flow: up to 1,000 m³/h
- Total connected load: up to 8.3 kW
