AQUASORB adsorption dryer

  • Effective moisture separation - regeneration air circuit ensures direct liquid water separation.
  • Operation without exhaust air system - no humid air removal to the outside required.
  • Optimized heat utilisation - Efficient recirculation of heat into the dry air.
  • Ideal for closed rooms - Perfect for applications without exhaust air options.
AQUASORB Entfeuchter - Illustration der Funktionsweise

All AQUASORB adsorption dryer

AQUASORB adsorption dryer: 1 Product
  • Construction dryer type KT95evo
    Adsorption dryer type AQ-30B / AQ-31B / AQ-31L
    • Dehumidification capacity: 0.85 – 1.55 kg/h
    • Air volume flow: 330 – 370 m³/h
    • Dew point applicable below 0°C
Building dryer advice

Personal advice?

Can’t decide on the right product for your purposes? Then contact us for a personal consultation.

AQUASORB – with air-cooled condenser

With the AQUASORB, the regeneration air is fed through an air-to-air heat exchanger in a closed circuit. This enables the moisture previously adsorbed by the rotor to be removed in purely liquid form. It is therefore not necessary to discharge the humid air outside.

By combining cooling air and dry air, the heat released in the condenser and the residual heat contained in the rotor are fed to the dry air. Ideal as a small dehumidifier for closed rooms where it is not possible to remove humid air.

Possible areas of application

  • Construction drying: Prevents moisture damage in new buildings or after water damage.
  • Storage of materials: Protects sensitive building materials such as wood, plaster or drywall from the effects of moisture.
  • Interior construction & renovation: Supports controlled humidity for optimum processing conditions for paints, varnishes and adhesives.
  • Basement rooms & workshops: Reduces humidity in closed rooms where no exhaust air duct is possible.